Add your parts
Drop STEP, STP, or STL files into the browser. Add several parts when they belong to the same sourcing project.
CAD-driven injection mold estimating
Know the mold budget before the sourcing cycle starts.
QuoteMyMold turns part geometry and production requirements into an early, traceable tooling and part-cost estimate—directly in your browser.
- Original CAD stays local
- STEP, STP, and STL
- No account required
Tooling budget$8.4k–$11.7k
GeometryScreened
Illustrative result · not a production quote
Browser-sideCAD inspection
Project-levelMulti-part estimating
Line-itemCost visibility
Engineer-readyRequirements handoff
The physical process
From tool steel to repeatable molded parts.
The budget behind an injection-molded part is shaped long before the first production shot: the cavity must be machined, the tool assembled and proven, and every molded feature made repeatable.
From geometry to budget
A faster first answer, with the assumptions exposed.
Early mold estimates are useful only when everyone can see what they are based on. QuoteMyMold keeps the model measurements, manufacturing choices, and estimate together.
Set the production basis
Choose resin, tooling arrangement, annual volume, finish, and the requirements that materially change mold cost.
Review the budget
See a part-by-part estimate, then send the measured project data to engineering when you need a manufacturable quote.
Built for the RFQ gap
Useful before a moldmaker has reviewed every detail.
Geometry screen
Reads bounding dimensions, volume, wall behavior, undercut indicators, and complexity signals from each model.
Traceable estimate
Separates tooling, part production, logistics, and risk allowances instead of returning one unexplained number.
Multi-part projects
Apply one manufacturing basis across an assembly, then customize only the parts that need an exception.
Review handoff
Submit measured geometry and requirements for engineering review without uploading the original CAD file.
Designed around sensitive CAD
Your original model is analyzed in the browser.
When you request review, QuoteMyMold sends the filename, derived geometry, project requirements, contact details, and estimate snapshot. It does not retain the original CAD file.
Read the data policyBefore you begin
What this estimate is—and is not.
Is this a firm manufacturing quote?
No. It is a budgetary estimate for planning and supplier conversations. Final pricing requires engineering review of geometry, quality expectations, material, and production conditions.
Can I estimate a whole assembly?
Yes. Add multiple model files, use shared project requirements, and override a requirement on an individual part when necessary.
Which files work?
STEP, STP, and STL are supported. STEP is preferred when accurate solid geometry is available.
What happens after I request review?
The project record is saved for follow-up. An engineer still needs to confirm manufacturability and commercial terms before production.
Start with the geometry
Open the estimator